#!/bin/sh

set -e

case "$1" in
    configure)
        # Create the private tmp directory for snap-confine
        install -d -m 0700 /tmp/snap-private-tmp

        # Ensure that the void directory has correct permissions.
        chmod 111 /var/lib/snapd/void

        # ensure required caps on snap-confine
        setcap -q - /usr/lib/snapd/snap-confine < /usr/lib/snapd/snap-confine.caps
        ;;
esac

# Automatically added by dh_apparmor/5.0.0~beta1-0ubuntu7
if [ "$1" = "configure" ]; then
    APP_PROFILE="/etc/apparmor.d/usr.lib.snapd.snap-confine.real"
    if [ -f "$APP_PROFILE" ]; then
        # Add the local/ include
        LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.lib.snapd.snap-confine.real"

        test -e "$LOCAL_APP_PROFILE" || {
            mkdir -p `dirname "$LOCAL_APP_PROFILE"`
            install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
        }

        # Reload the profile, including any abstraction updates
        if aa-enabled --quiet 2>/dev/null; then
            apparmor_parser -r -T -W "$APP_PROFILE" || true
        fi
    fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -x "$(command -v systemd-tmpfiles)" ]; then
		systemd-tmpfiles ${DPKG_ROOT:+--root="$DPKG_ROOT"} --create snapd.conf || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -x "$(command -v systemd-tmpfiles)" ]; then
		systemd-tmpfiles ${DPKG_ROOT:+--root="$DPKG_ROOT"} --create snapd.conf || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -x "$(command -v systemd-tmpfiles)" ]; then
		systemd-tmpfiles ${DPKG_ROOT:+--root="$DPKG_ROOT"} --create snapd.conf || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemduser/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -z "$DPKG_ROOT" ] ; then
		# The following line should be removed in trixie or trixie+1
		deb-systemd-helper --user unmask 'snapd.session-agent.socket' >/dev/null || true

		# was-enabled defaults to true, so new installations run enable.
		if deb-systemd-helper --quiet --user was-enabled 'snapd.session-agent.socket' ; then
			# Enables the unit on first installation, creates new
			# symlinks on upgrades if the unit file has changed.
			deb-systemd-helper --user enable 'snapd.session-agent.socket' >/dev/null || true
		else
			# Update the statefile to add new symlinks (if any), which need to be
			# cleaned up on purge. Also remove old symlinks.
			deb-systemd-helper --user update-state 'snapd.session-agent.socket' >/dev/null || true
		fi
	fi
fi
# End automatically added section
# Automatically added by dh_installdeb/13.31ubuntu1
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/usr.lib.snapd.snap-confine 2.23.6\~ -- "$@"
dpkg-maintscript-helper rm_conffile /etc/grub.d/09_snappy 1.7.3ubuntu1 -- "$@"
dpkg-maintscript-helper rm_conffile /etc/ld.so.conf.d/snappy.conf 2.0.7\~ -- "$@"
dpkg-maintscript-helper rm_conffile /etc/sudoers.d/99-snapd.conf 2.50\~ -- "$@"
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.socket' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.socket'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.socket' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.socket' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		if [ -n "$2" ]; then
			_dh_action=restart
		else
			_dh_action=start
		fi
		deb-systemd-invoke $_dh_action 'snapd.socket' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		if [ -n "$2" ]; then
			_dh_action=restart
		else
			_dh_action=start
		fi
		deb-systemd-invoke $_dh_action 'snapd.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.apparmor.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.apparmor.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.apparmor.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.apparmor.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.autoimport.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.autoimport.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.autoimport.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.autoimport.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.core-fixup.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.core-fixup.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.core-fixup.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.core-fixup.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.recovery-chooser-trigger.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.recovery-chooser-trigger.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.recovery-chooser-trigger.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.recovery-chooser-trigger.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.seeded.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.seeded.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.seeded.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.seeded.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.snap-repair.timer' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.snap-repair.timer'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.snap-repair.timer' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.snap-repair.timer' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.system-shutdown.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.system-shutdown.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.system-shutdown.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.system-shutdown.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.31ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		if [ -n "$2" ]; then
			_dh_action=restart
		else
			_dh_action=start
		fi
		deb-systemd-invoke $_dh_action 'snapd.apparmor.service' 'snapd.autoimport.service' 'snapd.core-fixup.service' 'snapd.failure.service' 'snapd.gpio-chardev-setup.target' 'snapd.mounts.target' 'snapd.recovery-chooser-trigger.service' 'snapd.seeded.service' 'snapd.snap-repair.service' 'snapd.snap-repair.timer' 'snapd.system-shutdown.service' >/dev/null || true
	fi
fi
# End automatically added section