"""scrypt hash frontend and help utilities"""

from warnings import warn

from passlib import exc
from passlib.utils import to_bytes

__all__ = [
    "validate",
    "scrypt",
]


#: internal global constant for setting stdlib scrypt's maxmem (int bytes).
#: set to -1 to auto-calculate (see _load_stdlib_backend() below)
#: set to 0 for openssl default (32mb according to python docs)
#: TODO: standardize this across backends, and expose support via scrypt hash config;
#:       currently not very configurable, and only applies to stdlib backend.
SCRYPT_MAXMEM = -1

#: max output length in bytes
MAX_KEYLEN = ((1 << 32) - 1) * 32

#: max ``r * p`` limit
MAX_RP = (1 << 30) - 1


# TODO: unittests for this function
def validate(n, r, p):
    """
    helper which validates a set of scrypt config parameters.
    scrypt will take ``O(n * r * p)`` time and ``O(n * r)`` memory.
    limitations are that ``n = 2**<positive integer>``, ``n < 2**(16*r)``, ``r * p < 2 ** 30``.

    :param n: scrypt rounds
    :param r: scrypt block size
    :param p: scrypt parallel factor
    """
    if r < 1:
        raise ValueError(f"r must be > 0: r={r!r}")

    if p < 1:
        raise ValueError(f"p must be > 0: p={p!r}")

    if r * p > MAX_RP:
        # pbkdf2-hmac-sha256 limitation - it will be requested to generate ``p*(2*r)*64`` bytes,
        # but pbkdf2 can do max of (2**31-1) blocks, and sha-256 has 32 byte block size...
        # so ``(2**31-1)*32 >= p*r*128`` -> ``r*p < 2**30``
        raise ValueError(f"r * p must be < 2**30: r={r!r}, p={p!r}")

    if n < 2 or n & (n - 1):
        raise ValueError(f"n must be > 1, and a power of 2: n={n!r}")

    return True


UINT32_SIZE = 4


def estimate_maxmem(n, r, p, fudge=1.05):
    """
    calculate memory required for parameter combination.
    assumes parameters have already been validated.

    .. warning::
        this is derived from OpenSSL's scrypt maxmem formula;
        and may not be correct for other implementations
        (additional buffers, different parallelism tradeoffs, etc).
    """
    # XXX: expand to provide upper bound for diff backends, or max across all of them?
    # NOTE: openssl's scrypt() enforces it's maxmem parameter based on calc located at
    # <openssl/providers/default/kdfs/scrypt.c>, ending in line containing "Blen + Vlen > maxmem"
    # using the following formula:
    #     Blen = p * 128 * r
    #     Vlen = 32 * r * (N + 2) * sizeof(uint32_t)
    #     total_bytes = Blen + Vlen
    maxmem = r * (128 * p + 32 * (n + 2) * UINT32_SIZE)
    # add fudge factor so we don't have off-by-one mismatch w/ openssl
    return int(maxmem * fudge)


# TODO: configuration picker (may need psutil for full effect)


#: backend function used by scrypt(), filled in by _set_backend()
_scrypt = None

#: name of backend currently in use, exposed for informational purposes.
backend = None


def scrypt(secret, salt, n, r, p=1, keylen=32):
    """run SCrypt key derivation function using specified parameters.

    :arg secret:
        passphrase string (str is encoded to bytes using utf-8).

    :arg salt:
        salt string (str is encoded to bytes using utf-8).

    :arg n:
        integer 'N' parameter

    :arg r:
        integer 'r' parameter

    :arg p:
        integer 'p' parameter

    :arg keylen:
        number of bytes of key to generate.
        defaults to 32 (the internal block size).

    :returns:
        a *keylen*-sized bytes instance

    SCrypt imposes a number of constraints on it's input parameters:

    * ``r * p < 2**30`` -- due to a limitation of PBKDF2-HMAC-SHA256.
    * ``keylen < (2**32 - 1) * 32`` -- due to a limitation of PBKDF2-HMAC-SHA256.
    * ``n`` must a be a power of 2, and > 1 -- internal limitation of scrypt() implementation

    :raises ValueError: if the provided parameters are invalid (see constraints above).

    .. warning::

        Unless the third-party ``scrypt <https://pypi.python.org/pypi/scrypt/>``_ package
        is installed, passlib will use a builtin pure-python implementation of scrypt,
        which is *considerably* slower (and thus requires a much lower / less secure
        ``n`` value in order to be usuable). Installing the :mod:`!scrypt` package
        is strongly recommended.
    """
    validate(n, r, p)
    secret = to_bytes(secret, param="secret")
    salt = to_bytes(salt, param="salt")
    if keylen < 1:
        raise ValueError("keylen must be at least 1")
    if keylen > MAX_KEYLEN:
        raise ValueError("keylen too large, must be <= %d" % MAX_KEYLEN)
    return _scrypt(secret, salt, n, r, p, keylen)


def _load_builtin_backend():
    """
    Load pure-python scrypt implementation built into passlib.
    """
    slowdown = 100
    warn(
        "Using builtin scrypt backend, which is %dx slower than is required "
        "for adequate security. Installing scrypt support (via 'pip install scrypt') "
        "is strongly recommended" % slowdown,
        exc.PasslibSecurityWarning,
    )
    from ._builtin import ScryptEngine

    return ScryptEngine.execute


def _load_cffi_backend():
    """
    Try to import the ctypes-based scrypt hash function provided by the
    ``scrypt <https://pypi.python.org/pypi/scrypt/>``_ package.
    """
    try:
        from scrypt import hash  # type: ignore[import-not-found]

        return hash
    except ImportError:
        pass
    # not available, but check to see if package present but outdated / not installed right
    try:
        import scrypt  # noqa: F401
    except ImportError as err:
        if "scrypt" not in str(err):
            # e.g. if cffi isn't set up right
            # user should try importing scrypt explicitly to diagnose problem.
            warn(
                "'scrypt' package failed to import correctly (possible installation issue?)",
                exc.PasslibWarning,
            )
        # else: package just isn't installed
    else:
        warn(
            "'scrypt' package is too old (lacks ``hash()`` method)", exc.PasslibWarning
        )
    return None


def _load_stdlib_backend():
    """
    Attempt to load stdlib scrypt() implement and return wrapper.
    Returns None if not found.
    """
    try:
        # new in python 3.6, if compiled with openssl >= 1.1
        from hashlib import scrypt as stdlib_scrypt
    except ImportError:
        return None

    def stdlib_scrypt_wrapper(secret, salt, n, r, p, keylen):
        # work out appropriate "maxmem" parameter
        #
        # TODO: would like to enforce a single "maxmem" policy across all backends;
        # and maybe expose this via scrypt hasher config.
        #
        # for now, since parameters should all be coming from internally-controlled sources
        # (password hashes), using policy of "whatever memory the parameters needs".
        # furthermore, since stdlib scrypt is only place that needs this,
        # currently calculating exactly what maxmem needs to make things work for stdlib call.
        # as hack, this can be overriden via SCRYPT_MAXMEM above,
        # would like to formalize all of this.
        maxmem = SCRYPT_MAXMEM
        if maxmem < 0:
            maxmem = estimate_maxmem(n, r, p)
        return stdlib_scrypt(
            password=secret, salt=salt, n=n, r=r, p=p, dklen=keylen, maxmem=maxmem
        )

    return stdlib_scrypt_wrapper


#: list of potential backends
backend_values = ("stdlib", "scrypt", "builtin")

#: dict mapping backend name -> loader
_backend_loaders = dict(
    stdlib=_load_stdlib_backend,
    scrypt=_load_cffi_backend,  # XXX: rename backend constant to "cffi"?
    builtin=_load_builtin_backend,
)


def _set_backend(name, dryrun=False):
    """
    set backend for scrypt(). if name not specified, loads first available.

    :raises ~passlib.exc.MissingBackendError: if backend can't be found

    .. note:: mainly intended to be called by unittests, and scrypt hash handler
    """
    if name == "any":
        return
    if name == "default":
        for name in backend_values:
            try:
                _set_backend(name, dryrun=dryrun)
                return
            except exc.MissingBackendError:  # noqa: PERF203
                continue
        raise exc.MissingBackendError("no scrypt backends available")
    loader = _backend_loaders.get(name)
    if not loader:
        raise ValueError(f"unknown scrypt backend: {name!r}")
    hash = loader()
    if not hash:
        raise exc.MissingBackendError(f"scrypt backend {name!r} not available")
    if dryrun:
        return
    global _scrypt, backend  # noqa: PLW0603
    backend = name
    _scrypt = hash


# initialize backend
_set_backend("default")


def _has_backend(name):
    try:
        _set_backend(name, dryrun=True)
        return True
    except exc.MissingBackendError:
        return False